Arduino line follower robot

-

How To Make Arduino Line Follower Robot?

A Line Follower Robot, as the name suggests, is an automated guided vehicle, which follow a visual line embedded on the floor or ceiling. Usually, the visual line is the path in which the line follower robot goes and it will be a black line on a white surface but the other way (white line on a black surface) is also possible. Certain advanced Line Follower Robots use invisible magnetic field as their paths.

Large line follower robots are usually used in industries for assisting the automated production process. They are also used in military applications, human assistance purpose, delivery services etc.
Line follower Robot is one of the first robots that beginners and students would get their first robotic experience with. In this project, we have designed a simple Line Follower Robot using Arduino and some other components.



Circuit Diagram

Arduino Line Follower Robot Circuit


Components Required

  • Arduino UNO (or Arduino Nano)
  • L293D Motor Driver IC
  • Geared Motors x 2
  • Robot Chassis
  • IR Sensor Module x 2
  • Black Tape (Electrical Insulation Tape)
  • Connecting Wires
  • Power supply
Note: We have used a prebuilt IR Sensor Module that consists of an IR LED and a Photo Diode. If you do not have this, we have explained how to build one yourself.

Block Diagram of the Project

The line follower robot built in this project is divided in to 4 blocks. The following image shows the block diagram for line follower robot.

Block Diagram Description

Sensors (IR Sensor): We have used IR Sensor Module as the line detecting sensor for the project. It consists of an IR LED and a Photo diode and some other components like comparator, LED etc.
IR Sensor Module
As mentioned earlier, we have used a pre – assembled IR Sensor. In case you do not have one, you can make your own sensor using the following circuit.
IR Sensor Circuit
The working of the IR Sensor and its scope in this project will be explained in the actual working of the Line Follower Robot.
Controller (Arduino UNO): Arduino UNO is the main controller in the project. The data from the sensors (IR Sensors) will be given to Arduino and it gives corresponding signals to the Motor Driver IC.
Motor Driver (L293D): L293D Motor Driver IC is used in this project to drive the motors of the robot. It receives signals from Arduino based on the information from the IR Sensors.
Note: The power supply to the motors must be given from the motor driver IC. Hence, choose the appropriate power supply which is sufficient for all the components including the motors.
Motors (Geared Motors): We have used two geared motors at the rear of the line follower robot. These motors provide more torque than normal motors and can be used for carrying some load as well.
Geared Motor

Working of Arduino Line Follower Robot

In this project, we have designed an Arduino based Line Follower Robot. The working of the project is pretty simple: detect the black line on the surface and move along that line. The detailed working is explained here.
As mentioned in the block diagram, we need sensors to detect the line. For line detection logic, we used two IR Sensors, which consists of IR LED and Photodiode. They are placed in a reflective way i.e. side – by – side so that whenever they come in to proximity of a reflective surface, the light emitted by IR LED will be detected by Photo diode.
The following image shows the working of a typical IR Sensor (IR LED – Photodiode pair) in front of a light coloured surface and a black surface. As the reflectance of the light coloured surface is high, the infrared light emitted by IR LED will be maximum reflected and will be detected by the Photodiode.
IR Sensor Working
In case of black surface, which has a low reflectance, the light gets completely absorbed by the black surface and doesn’t reach the photodiode.
Using the same principle, we will setup the IR Sensors on the Line Follower Robot such that the two IR Sensors are on the either side of the black line on the floor. The setup is shown below.
IR Sensors in Line Follower
When the robot moves forward, both the sensors wait for the line to be detected. For example, if the IR Sensor 1 in the above image detects the black line, it means that there is a right curve (or turn) ahead.
Arduino UNO detects this change and sends signal to motor driver accordingly. In order to turn right, the motor on the right side of the robot is slowed down using PWM, while the motor on the left side is run at normal speed.
IR Sensors in Line Follower Left Right
Similarly, when the IR Sensor 2 detects the black line first, it means that there is a left curve ahead and the robot has to turn left. For the robot to turn left, the motor on the left side of the robot is slowed down (or can be stopped completely or can be rotated in opposite direction) and the motor on the right side is run at normal speed.
Arduino UNO continuously monitors the data from both the sensors and turns the robot as per the line detected by them.

Code

int mot1=9;
int mot2=6;
int mot3=5;
int mot4=3;
int left=13;
int right=12;
int Left=0;
int Right=0;
void LEFT (void);
void RIGHT (void);
void STOP (void);
void setup()
{
pinMode(mot1,OUTPUT);
pinMode(mot2,OUTPUT);
pinMode(mot3,OUTPUT);
pinMode(mot4,OUTPUT);
pinMode(left,INPUT);
pinMode(right,INPUT);
digitalWrite(left,HIGH);
digitalWrite(right,HIGH);
}
void loop()
{
analogWrite(mot1,255);
analogWrite(mot2,0);
analogWrite(mot3,255);
analogWrite(mot4,0);
while(1)
{
Left=digitalRead(left);
Right=digitalRead(right);
if((Left==0 && Right==1)==1)
LEFT();
else if((Right==0 && Left==1)==1)
RIGHT();
}
}
void LEFT (void)
{
analogWrite(mot3,0);
analogWrite(mot4,30);
while(Left==0)
{
Left=digitalRead(left);
Right=digitalRead(right);
if(Right==0)
{
int lprev=Left;
int rprev=Right;
STOP();
while(((lprev==Left)&&(rprev==Right))==1)
{
Left=digitalRead(left);
Right=digitalRead(right);
}
}
analogWrite(mot1,255);
analogWrite(mot2,0);
}
analogWrite(mot3,255);
analogWrite(mot4,0);
}
void RIGHT (void)
{
analogWrite(mot1,0);
analogWrite(mot2,30);
while(Right==0)
{
Left=digitalRead(left);
Right=digitalRead(right);
if(Left==0)
{
int lprev=Left;
int rprev=Right;
STOP();
while(((lprev==Left)&&(rprev==Right))==1)
{
Left=digitalRead(left);
Right=digitalRead(right);
}
}
analogWrite(mot3,255);
analogWrite(mot4,0);
}
analogWrite(mot1,255);
analogWrite(mot2,0);
}
void STOP (void)
{
analogWrite(mot1,0);
analogWrite(mot2,0);
analogWrite(mot3,0);
analogWrite(mot4,0);
}
view rawArduino Line follower robot hosted with ❤ by GitHub

Note:
  • In order to increase the efficiency of black line detection, number of sensors can be increased. An array of sensors will be more accurate than just two sensors.
  • In this project (where two sensors are used), the positioning of the sensors is very important. The width of the black line plays a major role in the placement of the sensors.
  • The sensor to detect the line can also be constructed using an LED and LDR pair.

Applications of Line Follower Robot

  • Line follower Robots are commonly used for automation process in industries, military applications and consumer applications.
  • They are very useful as they can work without any supervision i.e. they work as automatic guided vehicles.
  • With additional features like obstacle avoidance and other security measures, line follower robots can be used in driver less cars. 
  • This is the starter kit that has come into the existence when a motion of the robot is given high priority. It follows the visual line path and some advanced line follower robots uses an invisible magnetic field as their paths.
    As you are aware of robot applications in military, industries and domestic purposes that are in great demand. We offered the Arduino Robot Kits that satisfies all your desires. Have a look at these Arduino robot kits that has a wide range of applications and comes at very low prices.
    If you have any doubts, please share with us in the comment section given below. We are very happy to respond quickly.

Construction and Output Video



This is the starter kit that has come into the existence when a motion of the robot is given high priority. It follows the visual line path and some advanced line follower robots uses an invisible magnetic field as their paths.
As you are aware of robot applications in military, industries and domestic purposes that are in great demand. We offered the Arduino Robot Kits that satisfies all your desires. Have a look at these Arduino robot kits that has a wide range of applications and comes at very low prices.
If you have any doubts, please share with us in the comment section given below. We are very happy to respond quickly.

Comments

Post a Comment

Popular posts from this blog

-
Image
Top Hardware Platforms for Internet of Things (IoT) Top Hardware Platforms for Internet of Things (IoT) IoT (Internet of Things)  is no longer a buzzword. With several inspiring use cases, emanating on a daily basis, multiple firms are now discovering how they could leverage on the technology for business growth. It is fast becoming an important feature for new devices to be IoT based, irrespective of the other technologies implemented and according to  gartner , by 2020, 95% of new devices and systems will use the IoT. We already discussed about some  popular IoT devices  available in the market and also developed many  DIY projects based on IoT . While some of the businesses are leveraging on IoT for direct business solutions, other firms are tapping into the business opportunities that exists in the provision of IoT platforms to serve as backbones for rapid development and deployment of IoT solutions. These platforms have become a k...
Read more
-
Image
How to Use Serial Bluetooth in ESP32 www.circuitsindia.blogspot.com Bluetooth modules like HC-05 and HC-06 are easy to set-up and quick to use with Arduino IDE, but they have their own limitation like high power consumption and they operate on the old Bluetooth V2.0. Also, recently I got myself a new  ESP32 DEV kit , these modules has a punch of features like  in-built Wi-Fi and Bluetooth , ample ADC and DAC pins, Audio Support, SD Card Support, Deep Sleep Mode etc. it almost has everything to build  IoT projects . And just as any hobbyist would love it, the ESP32 is now officially supported by the Arduino IDE. Earlier we have to do a huge work around with  Neil Kolbans Library , but now thanks to this guy’s hard work  programming ESP32 with Arduino IDE  has become a cake walk. Hence, I launched my Arduino IDE and went thorough few example BLE programs, through which I understood nothing. After a long time of surfing and youtubing I realized th...
Read more
-
Image
Programming ESP32 Board with Arduino IDE 0 Programming ESP32 Board with Arduino IDE Note:  This tutorial was written after Arduino has officially launched its support for ESP32 boards. So if you have followed the  old method of using GIT  to install the boards then you would have to follow these steps again (highly recommended) if you need support for new libraries. If you are working with ESP32 for first time you do not have to worry about this. Internet has reached almost every pocket through smart phones, it is estimated that about 3.2 billion people use internet but surprisingly about 8.4 billion devices use internet. That is electronics devices are connected to internet more than twice of the population who use internet and it is making the things around us smarter every day. The major reason is the boom of  Internet of things  which is commonly known as IOT, it is also estimated that by the end of 2020 we will have 20.4 bil...
Read more